-
How to Choose Between ASTM A48 Class 30, 35, and 40 Gray Cast Iron
A pump casing drawing that calls for ASTM A48 Class 30B tells the foundry what to pour, while an older mill drawing that says only “gray cast iron” leaves the class open. Either way, the class is the customer’s decision, and Lake Foundry can offer guidance. Moving from Class 30 to Class 40 adds strength…
-
Porosity & Shrinkage Causes in Iron Castings
Porosity and shrinkage are two common defects in gray and ductile iron castings. Both leave voids in the metal, but their causes vary and require different corrections. You can see these defects on the casting surface or discover them during machining, inspection, or pressure testing. Their type and location help identify the cause and how…
-
Ductile Iron & Gray Iron Have Different Applications That Could Affect Your Part
Gray iron and ductile iron are both cast irons, but each has different applications. The material and grade on a casting drawing establish the strength, ductility, machinability, and service performance the finished part must deliver. For engineers and buyers sourcing a new casting or replacing an existing one, these specifications determine what the foundry must…
