
Capabilities · Emergency & replacement
Emergency & Replacement Castings
Gray and ductile iron replacement castings produced from existing patterns, drawings, 3D models, or the physical part. Emergency turnaround can be as fast as one to two weeks.
1–2 weeks
Emergency turnaround
12,500 lb
Gray iron finished castings
3,500 lb
Ductile iron finished castings
4–6 weeks
Non-emergency lead time

Replacement Castings Without an Existing Pattern or Drawing
Older equipment parts can be difficult to replace. For example, the OEM may no longer support the equipment, the original pattern may be gone, or the drawing may be incomplete or unavailable.
While most emergency work starts from a drawing, we can use an existing pattern, a 3D model, or the physical component. Even if there is no drawing, we can reverse-engineer the part and develop a new pattern.
When we work from a worn component, we do more than duplicate its current dimensions. Our team evaluates the wear and reconstructs the geometry to produce the replacement correctly. We also account for the material, shrinkage, molding requirements, and machining allowances before the part goes into production.
We can manage the complete job through pattern making, molding, pouring, heat treatment, testing, inspection, and machining.

Emergency Casting Turnaround
Typical casting programs run four to six weeks. When equipment is down and the job allows it, we can move considerably faster. Emergency replacement castings have been completed in as little as one to two weeks. Reverse-engineering a part takes longer.
Keeping pattern making in-house helps us control that schedule. We work with foam and wood patterns. The method depends on the part, the quantity required, and how quickly the casting is needed.

Case study
1,900 lb Replacement Casting Shipped in 2½ Weeks
A customer needed to replace a worn 1,900 lb gray iron casting but no longer had the original drawing or design documentation.
Lake Foundry used the existing component to reconstruct the required geometry, account for wear, and develop a new pattern. The replacement was then cast and finished for the application.
1,900 lb
Casting weight
2½ weeks
Purchase order to shipment
Gray and Ductile Iron Casting Capabilities
| Gray Iron | Ductile Iron | |
|---|---|---|
| Finished casting size | Up to 12,500 lb | Up to 3,500 lb |
| Pour capacity | Up to 15,000 lb | Up to 6,000 lb |
| Specifications | ASTM A48, A126, A278, A319 | ASTM A395, A536 |
| Common grades | CL20, CL25, CL30, CL35, CL40 | 60‑40‑18, 65‑45‑12, 65‑45‑15, 80‑55‑06, 100‑70‑03 |
| Production | One-off and recurring low-volume | One-off and recurring low-volume |
| Molding | No-bake sand | |
| Typical lead time | 4–6 weeks | |
| Emergency lead time | 1–2 weeks; contact us for faster turnaround | |
| Molding box / flask size | 130″ × 130″; custom sizes can be accommodated | |
Frequently Asked Questions
Can you make a replacement casting without a drawing or pattern?
Yes. Lake Foundry can work from an existing pattern, an old drawing, a 3D model, or the physical component. When no drawing exists, we can reverse-engineer the part and develop new tooling.
How quickly can Lake Foundry produce an emergency replacement casting?
Typical programs run four to six weeks. Emergency replacements can be completed in as little as one to two weeks, depending on the size, material, geometry, and finishing requirements.
What size castings can Lake Foundry produce?
Lake Foundry produces finished castings up to 12,500 lb in gray iron and up to 3,500 lb in ductile iron. Pour capacity is up to 15,000 lb of gray iron and up to 6,000 lb of ductile iron.
Can Lake Foundry provide a finished component?
Yes. Lake Foundry can manage pattern making, casting, heat treatment, testing, inspection, and machining through the finished component.

Have a Casting to Review?
Send us the drawing, 3D model, existing pattern, or physical part, along with the material, quantity, and turnaround you need. If some of that information is missing, send what you have. Our team will review the requirements and work with you to get the casting into production.
