
Capabilities · Gray iron
Gray Iron Castings Up to 12,500 lb
Our gray iron production includes pump components, replacement parts, and other industrial castings where size, internal geometry, or production volume make the job a better fit for a jobbing foundry.
Gray Iron Capacity
- Finished casting sizeUp to 12,500 lb
- Pour capacityUp to 15,000 lb of gray iron
- MoldingNo-bake sand
- SpecificationsASTM A48, A126, A278, and A319
- Common gradesCL20, CL25, CL30, CL35, CL40
- ProductionOne-offs through recurring low-volume programs
- Typical lead time4–6 weeks

Gray Iron Grades & Specifications
We pour gray iron to the material specification established for the component.
| Specification | Our Experience |
|---|---|
| ASTM A48 | General gray iron castings classified by tensile strength. Our production includes Classes 20, 25, 30, 35, and 40. |
| ASTM A126 | Gray iron for valves, flanges, and pipe fittings, including Classes A, B, and C. |
| ASTM A278 | Gray iron for pressure-containing components at elevated temperatures. |
| ASTM A319 | Gray iron for elevated-temperature, non-pressure-containing applications. |
For an established part, we work to the existing material specification rather than recommending a different grade based on a general application. For new programs, the customer or design engineer establishes the material requirements and we review them as part of evaluating the casting.

Gray Iron Pump Castings
Gray iron has been an important part of our pump work for years. We’ve produced casings, volutes, bearing housings, and other components across OEM, engineered-to-order, and mature equipment programs.
Pump casings and volutes can involve substantial internal geometry formed by cores. The pattern equipment, core arrangement, molding approach, and machining stock all have to support the finished geometry before the part goes into production.
Existing Gray Iron Programs
We can take on established gray iron parts as well as new programs. Existing drawings, material specifications, patterns, and core boxes can be reviewed to determine what would be required to produce the casting at Lake. If existing tooling is unavailable or impractical to move, we can also evaluate other tooling approaches based on the part and quantity.
Pattern Making
Our in-house pattern shop supports new and existing gray iron programs with foam and wood patterns. We can also offer aluminum patterns.
Inspection & Testing
Gray iron castings are inspected and tested to the requirements established for the part and material specification.
Lake Foundry is ISO 9001:2015 certified.
Other Gray Iron Applications
Pump and fluid handling is one of our deepest areas of experience, but we also produce gray iron components for pulp and paper equipment, industrial machinery, and other heavy industrial applications. Size, geometry, material, and production requirements generally tell us more about whether a casting fits our operation than the industry name alone.
FAQs
What Size Gray Iron Castings Does Lake Foundry Produce?
Lake Foundry produces finished gray iron castings up to 12,500 lb, with pour capacity up to 15,000 lb. Much of our work involves larger or more complex parts produced in relatively small quantities.
Which Gray Iron Specifications Do You Pour?
We pour gray iron to ASTM A48, A126, A278, and A319. Our A48 production includes Classes 20, 25, 30, 35, and 40. Our A126 work includes Classes A, B, and C.
What Is The Typical Lead Time For a Gray Iron Casting?
Typical lead time is 4 to 6 weeks. We confirm the timing for a specific job after we review the drawing, material specification, tooling, and quantity.
Do You Produce One-Off Or Low-Volume Gray Iron Castings?
Yes. Our gray iron production ranges from one-off castings to recurring low-volume programs. Jobs where size, internal geometry, or production volume make a high-volume foundry a poor fit are a good match for our operation.
What Molding Process Do You Use for Gray Iron Castings?
We produce gray iron castings in no-bake sand molds. This process suits the larger, more complex parts that make up much of our gray iron work.
Can You Produce a Gray Iron Part From Our Existing Patterns and Core Boxes?
Often, yes. We review your existing drawings, material specifications, patterns, and core boxes to determine what’s required to produce the casting at Lake. If the existing tooling is unavailable or impractical to move, we can evaluate other tooling approaches based on the part and quantity.
Will You Recommend a Gray Iron Grade for My Part?
For an established part, we work to the existing material specification. For a new program, the customer or design engineer sets the material requirements, and we review them as part of evaluating the casting.
What Gray Iron Pump Components Do You Cast?
We produce pump casings, volutes, bearing housings, and other components for OEM, engineered-to-order, and mature equipment programs. Many of these parts have significant internal geometry formed by cores, so the pattern equipment, core arrangement, and machining stock are planned before production begins.
What Information Do You Need to Quote a Gray Iron Casting?
Send us the drawing or model, the material specification, the approximate casting weight, and the quantity. If tooling already exists, include that information too.

Have a Casting to Review?
Send us the drawing, 3D model, existing pattern, or physical part, along with the material, quantity, and turnaround you need. If some of that information is missing, send what you have. Our team will review the requirements and work with you to get the casting into production.
