
Industries · Pump & fluid handling
Pump & Fluid Handling Castings
Large, complex gray and ductile iron castings for pump OEMs, engineered-to-order programs, and legacy equipment.

Experience with Complex Pump Castings
Lake Foundry has produced pump and fluid handling castings for decades. The work includes complex housings, casings, and other highly cored components where internal geometry, wall thickness, material properties, and machining requirements all have to be controlled.
Many of these programs also run at relatively low annual volumes. We are set up for prototypes, engineered-to-order components, and recurring production that may range from a handful of castings to a few hundred pieces a year.
We also support legacy pump programs when the original tooling has deteriorated, the pattern has been lost, or the original supplier is no longer available.
What customers say
“Lake Foundry is a great partner to work with. Quick response and consistently good quality.”
President, pump OEM

Pattern, Core, and Molding Experience
Complex pump castings require the pattern, cores, gating, and molding process to work together. Our foundry and pattern teams determine the right approach for the geometry and expected volume.
Tooling options include foam, wood, and aluminum patterns, and 3D-printed molds.
We can also manage heat treatment, testing, inspection, and machining. One team remains responsible for the part from initial review through the finished component.
For legacy programs, we can work from existing tooling, drawings, 3D models, or the physical part to recreate the required geometry and develop new tooling.
Pump Components We Cast

Pump and Volute Casings
Large and complex casings with internal flow geometry.
Bearing Housings and Brackets
Gray and ductile iron components for industrial pump assemblies.
Casing Covers and End Components
Cast components produced to OEM specifications.
Diffusers and Flow Components
Highly cored parts with complex internal geometry.
Pump Bowls and Large Housings
Components for vertical and industrial pump designs.
Impellers
Gray and ductile iron impellers where specified by the OEM design.
From Drawing to Production
We start by reviewing the drawings, models, material specifications, dimensional requirements, and expected production quantities.
Our team then determines the pattern, core, gating, and molding approach for the casting. Tooling is developed using the method best suited to the geometry and expected volume.
Initial castings are poured, tested, and inspected against the required specifications. Machining can be completed to the finished-part requirements.
Once the casting is approved, we can support prototype, short-run, or recurring low-volume production.
Pump Casting Experience
12
North American pump OEMs
544
Active pump casting part numbers
1–10,715
lb current pump casting range
5K–7K
Pieces in a typical year
Lake Foundry currently supports 12 North American pump OEMs with 544 active pump casting part numbers in gray and ductile iron.
Current pump castings range from approximately 1 lb to 10,715 lb, with typical annual volumes of 5,000 to 7,000 pieces.
Pump and fluid handling is an established part of our business, supported by decades of foundry, pattern, and machining experience.
Quality & Validation
Testing and inspection are based on the requirements of the casting and can include:
- Chemical analysis
- Mechanical testing
- Material certification
- ISO 9001:2015 certified
- Documentation and material traceability

Industries Served
- Water & Wastewater
- Building Services
- Fire Protection
- General Industrial
- Power & Utilities
Frequently Asked Questions
How large a pump casting can Lake Foundry produce?
Lake Foundry produces finished castings up to 12,500 lb in gray iron and up to 3,500 lb in ductile iron. Current pump castings range from about 1 lb to 10,715 lb.
What if the original pattern for our pump is no longer available?
Lake Foundry can work from an existing drawing, 3D model, or physical component to recreate the required geometry and develop new tooling.
Does Lake Foundry cast impellers?
Lake Foundry produces gray and ductile iron impellers where specified by the OEM design.
Can Lake Foundry handle low-volume pump programs?
Yes. Prototypes, engineered-to-order components, and recurring programs fit Lake’s production model.

Have a Casting to Review?
Send us the drawing, 3D model, existing pattern, or physical part, along with the material, quantity, and turnaround you need. If some of that information is missing, send what you have. Our team will review the requirements and work with you to get the casting into production.
